15340

Micro Vise

compatible with pin stub holder

A fast and clean way to hold specimens for SEM. The jaws are 25.4mm (1") wide. Maximum gap is 11mm (7/16"). Material: machined aluminum with stainless steel allen screw. Allen wrench included.

Screws used are 6-32 x 3/4 Soc Head, Vent and 6-32 x 5/16 Flat Head, SS

 15341 (use 15341-20)

Small Springloaded Vise Clamp

Small Springloaded vise clamp for samples up to 12.7mm (1/2"). The jaws are 25mm (1") wide. Jaws also accommodate 1/16 x 1/2" stainless steel pins for more awkward shaped samples. 4 pins are included. Removable pushrod for easy loading is provided. Material: machined aluminum with stainless steel pins and springs. Overall size of vise clamp w/o pin and pushrod 30 x 25 x 12.5mm (1.18 x 1 x 1/2").

Technical Notes, Small Springloaded Vise Clamp (276KB PDF)

Screw used is 2-56 x 1/8, Set Cup, SS

15343 (use 15341-20)

Springloaded Vise Clamp

Springloaded vise clamp for samples up to 26mm. The jaws are 25mm (1") wide. Jaws also accommodate 1/16" x 1/2" stainless steel pins for more awkward shaped samples. 4 pins are included. Removable pushrods for easy loading are provided. Material: machined aluminum with stainless steel pins and springs. Overall size of vise clamp w/o pin and push rods 50 x 25 x 15mm (2 x 1 x 5/8").

Technical Notes, Springloaded Vise Clamp (169KB PDF)

Screw used is 2-56 x 1/8, Set Cup, SS

15342

Universal Springloaded Vise

Springloaded vise clamp with reversible jaws for an opening up to 38mm. The universal jaws have special slots to firmly hold round samples of various diameters both horizontally and vertically. Maximum width of the jaws is 32mm. Material: machined aluminum with stainless steel springs, rods, screws, washers, and brass sliders. Overall size of the vise clamp w/o pin is 67 x 52 x 20mm (2.64 x 2 x 0.8").

Screw used is 2-56 x 1/8, Set Cup, SS

15475 (use 15475-10, 15475-20)

PELCO^® Large Universal Vise Clamp

The large and extremely versatile vise clamp is intended for large and heady samples or awkwardly shaped samples. Will clamp samples between 0-90mm. The two bases move 0-25mm. The array of holes take precision stainless steel 1/16" pins (10 pins are included) for either clamping the sample or for positioning the vise clamps (included). Each base has 9 positions for the vise clamp to enable optimum holding of samples up to 90mm. Overall size is 40W x 90L x 25mmH (1.6" x 3.5" x 1"). Standard 3.2mm (1/8") pin with 9.5mm (3/8") length.

Screw used is 2-56 x 1/8, Set Cup, SS

#15477 / 102mm (4")
#15476 / 152mm (6")
#15478 / 203mm (8")

#15477-40 / 102mm (4")
#15476-60 / 152mm (6")
#15478-80 / 203mm (8")

PELCO^® Bar Clamp Vise, 4", 6" and 8"

The PELCO^® Bar Clamp Vise is available in three lengths; 102mm (4"), 152mm (6") and 203mm (8") with the same clamps for each version. This bar type clamp can accommodate specimens up to 72mm (3"), 127mm (5") and 178mm (7") in length respectively. The jaws are reversible, offering different clamping options and they operate independently anywhere on the clamping bar. This will allow for positioning the region of interest of the specimen within the travel range of the SEM stage. Stainless steel 1/16" pins (6 pins are included) can be placed on the clamps for awkwardly shaped samples. Clamping bars and clamps can be purchased additionally to make up the best functional set for the job at hand. Made of vacuum grade aluminum with brass bar and brass thumbscrews and stainless steel type 316 dowels. Standard 3.2mm (1/8") pin with 9.5mm (3/8") length.

15477-10

Overall size for the 102mm(4") version: LxWxH 102 x 22 x 19mm (4" x 7/8" x ¾")
Overall size for the 152mm (6") version: LxWxH 152 x 22 x 19mm (6" x 7/8" x ¾")
Overall size for the 203mm (8") version: LxWxH 203 x 22 x 19mm (8" x 7/8" x ¾")

PELCO® Technical Notes: PELCO® Bar Clamp Vise, 4, 6, and 8" (80KB PDF)

Screw used is 4-40 x 3/8, Thumb, Brass