Silicone Molds

Technical Tip:
All PELCO^® Silicone Rubber Molds are made from the highest quality silicone rubber available. With care they will last a long time. After polymerization in a 60° C oven, let molds cool before removing blocks. This precaution will increase the lifespan of the mold. Using silicone rubber with Spurr's Resin will significantly reduce the lifespan of the molds. Maximum temperature: 218°C (425°F).

PELCO® Flat Embedding Molds - Blue, White or Translucent

Alphanumeric self-impression cavities, pretrimmed end.
Available in blue, white, or translucent silicone rubber.
Maximum temperature: 218°C (425°F).

Design: R.F. Bils

Number of cavities: 24
Numbering: A1- A6, B1-B6, C1-C6, D1-D6
Special cavities: 2 troughs - 1 x 4cm x 3mm deep
1 trough - 1 x 1.7cm x 3mm deep
Mold size: 105 x 70 x 7mm thick

Small Flat Embedding Mold

Designed for thicker specimens. Blue silicone rubber, no numbering.
Maximum temperature: 218°C (425°F).

Number of cavities: 12
Mold size: 80 x 45 x 7mm thick

110 Flat Embedding Mold

Consecutive numbering, pretrimmed end, blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 20
Numbering: 1-20
Mold size: 89 x 76 x 7mm thick

21 Cavity EM Embedding Mold

Single pretrimmed end with consecutive numbering. Blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 21
Numbering: 1-21
Mold size: 74 x 61 x 6mm thick

Double End Tapered Embedding Mold

Pretrimmed double ends for each cavity, doubling specimen capacity. Consecutive numbering, blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 24
Numbering: 1-24
Mold size: 67 x 85 x 7mm thick

10590 Double End Mold

Double pretrimmed ends, consecutive numbering, blue silicone rubber.
Maximum temperature: 218°C (425°F).

Number of cavities: 21
Numbering: 1-21
Mold size: 72 x 62 x 6mm thick

PELCO® 111 LDPE Flat Embedding Mold, Disposable

Completely disposable, translucent, low density polyethylene. Single use avoids cross contamination. Flexible for easy block removal. Economic alternative to silicone molds.
Maximum temperature for normal embedding processes: 80°C (176°F).
Maximum temperature for short duration: 95°C (203°F).

Number of cavities and size:
   14 for 1/8" x 1/4" x 1/2" blocks
   10 for 1/8" x 3/8" x 3/4" blocks

Mold size: 111 x 76 x 6.4mm thick (4 3/8" x 3" x 1/4")

Sold in package of 10 molds