SEM Specimen Mount Adapters

15363-1

15363-3

Pin Mount Adapters to Hitachi M4 or ISI/ABT/Topcon mounts

Pin mount adapters, 15 x 10mm H and 12.2 x 10mm with M4 thread on one side. Enables the use of standard pin mount with 1/8" (3.2mm) pin on Hitachi or ISI/ABT/Topcon SEMs. Made from aluminum with stainless set screw. Allen wrench included. Note: when these adapters are mounted on the Hitachi stag,e 6mm height is left, this will result in any mounts with pin lenght longer than 6mm having part of the pin mount sticking out of the adapter.

15387-2, 15361,

15364

Pin Mount Adapters to Hitachi M4 Thread
(Height extenders)

The pin mount adapters to M4, with standard 3.2mm (1/8") hole in the top and M4 thread in the base are available in 4 sizes:

• Ø15 x 15mm H (low)
• Ø16 x 25mm H (medium)
• Ø16 x 38mm H (high)
• Ø16 x 55mm H (extended)

They enable the use of standard pin mounts with 3.2mm (1/8") pin on Hitachi M4 thread. Longer adapters are used for short working distances without raising the specimen stage. Made from vacuum grade aluminum with stainless steel set screw. Allen wrench included.
When combined with the pin mount adapters (#15319, #15319-9 or #15319-2) these pin to M4 adapters can also be used as height extenders for pin mount style stage used on FEI/Philips, ZEISS/LEO, Cambridge, Leica, Tescan, CamScan and Amray SEMs. They can even be stacked to make them higher.

15318

PELCO^® Pin Stub Extender

12.5mm (1/2") high, pin stub extender allows bringing pin stubs and pin stub sample holders closer to the pole piece without moving the SEM sample stage. Multiple extenders are stackable. Compatible with all standard 3.2mm (1/8") pin stubs or pin stub SEM holders with maximum pin length of 10mm (0.4"). Made of vacuum grade aluminum with stainless steel allen set screw. Allen key included

Screw used is M3 x 3mm, Set, SS

15362

Pin Mount Adapter to JEOL 9.5mm cylinder mount

Pin mount adapter, 9.5 x 9.5mm H for JEOL. Enables the use of standard pin mount with 1/8" (3.2mm) pin on JEOL SEM. Made from aluminum with stainless set screw. Allen wrench included.

15362-12

Pin Mount Adapter to JEOL 12.2mm cylinder mount

Pin mount adapter, 12.2 x 10mm H for JEOL. Enables the use of standard pin mount with 1/8" (3.2mm) pin on JEOL SEM. Made from aluminum with stainless set screw. Allen wrench included.

15362-15

Pin Mount Adapter to JEOL 15mm cylinder mount

Pin mount adapter, 15 x 10mm H for JEOL. Enables the use of standard pin mount with 1/8" (3.2mm) pin on JEOL SEM. Made from aluminum with stainless set screw. Allen wrench included.

16153-9

Pin Mount Adapter to JEOL 25mm cylinder mount

Pin mount adapter, Ø25 x 10mm H for JEOL. Enables the use of standard pin mounts with 1/8" (3.2mm) pin on JEOL SEMs (including JEOL NEOSCOPE). Made from aluminum with stainless set screw. Allen wrench included.

16216-9

Pin Mount Adapter to JEOL 32mm cylinder mount

Pin mount adapter, Ø32 x 10mm H for JEOL. Enables the use of standard pin mounts with 1/8" (3.2mm) pin on JEOL SEMs (including JEOL NEOSCOPE). Made from aluminum with stainless set screw. Allen wrench included.

15316

Hitachi M4 Adapter to pin stub

Hitachi M4 adapter to standard 1/8" (3.2mm) pin stub. Enables the use of Hitachi mounts and specimen holders with M4 thread on SEMs with pin mount holder (FEI/Philips, ZEISS/LEO, Cambridge Instruments, Leica, Amray, Tescan and CamScan). Suitable for larger specimen holders. Pin length 3/8", table diameter 5/8" (15.9mm). Made from Aluminum with stainless steel screw.

15316-9

Hitachi M4 to ZEISS pin stub

Hitachi M4 adapter to standard 1/8" (3.2mm) pin stub. Enables the use of Hitachi mounts and specimen holders with M4 thread on ZEISS/LEO SEMs and SEM/FIB systems. Suitable for larger specimen holders. Pin length 6mm, table diameter 5/8" (15.9mm). Made from Aluminum with stainless steel screw.

15367-25

Hitachi M4 Adapter to 9.5mm JEOL cylinder mount

Hitachi M4 adapter to standard 9.5mm JEOL cylinder mount. Enables the use of Hitachi mounts and PELCO® modular specimen holders with M4 thread on JEOL SEMs. Cylinder mount Ø9.5 x 9.5mm. Made from aluminum with stainless steel screw.

15367-40

Hitachi M4 Adapter to 12.2mm JEOL cylinder mount

Hitachi M4 adapter to standard 12.2mm JEOL cylinder mount. Enables the use of Hitachi mounts and PELCO® modular specimen holders with M4 thread on JEOL SEMs. Cylinder mount Ø12.2 x 10mm. Made from aluminum with stainless steel screw.

15367-20

Hitachi M4 Adapter to 15mm JEOL cylinder mount

Hitachi M4 adapter to standard 15mm JEOL cylinder mount. Enables the use of Hitachi mounts and PELCO® modular specimen holders with M4 thread on JEOL SEMs. Cylinder mount Ø15 x 10mm. Made from aluminum with stainless steel screw.

16150-9

Hitachi M4 Adapter to 25mm JEOL cylinder mount

Hitachi M4 adapter to standard 25mm JEOL cylinder mount. Enables the use of Hitachi 15 and 25mm mounts with M4 thread on JEOL SEMs (including JEOL NEOSCOPE). Cylinder mount Ø25 x 5mm. Made from aluminum with stainless steel screw.

16217-9

Hitachi M4 Adapter to 32mm JEOL cylinder mount

Hitachi M4 adapter to standard 32mm JEOL cylinder mount. Enables the use of Hitachi 15, 25 and 32mm mounts with M4 thread on JEOL SEMs (including JEOL NEOSCOPE). Cylinder mount Ø32 x 6mm. Made from aluminum with stainless steel screw.

15319

Low Profile Hitachi M4 Pin Mount Adapter

Low profile pin with standard 1/8" (3.2mm) diameter with 3/8" (9.5mm) length and 4mm M4 thread. Converts any Hitachi M4 type specimen mount into a pin stub style mount (FEI/Philips, Cambridge Instruments, Leica, Amray, Tescan and CamScan). Can also be used to adapt Hitachi specimen holders with M4 thread to pin stub mounts which are used on many SEM platforms. Made from aluminum.

15319-9

Short M4 to ZEISS/LEO Pin Mount Adapter

Low profile pin with standard 1/8" (3.2mm) diameter with 1/4" (6mm) length and 4mm M4 thread. Converts any Hitachi M4 type specimen mount into a ZEISS pin stub style mount. Made from aluminum.

15319-2

Long M4 to Pin Mount Adapter

Long profile pin with standard 1/8" (3.2mm) diameter with 5/8" (14.75mm) length and 4mm M4 thread. Converts any Hitachi M4 type specimen mount into an Amray pin stub style mount. Made from aluminum.

15401

JEOL or ISI/ABT/Topcon mounts to Hitachi M4 mount

Small cylinder mount adapter accommodates JEOL or ISI/ABT/Topcon cylinder mounts up to 15mm diameter. Enables the use of Ø9.5 and Ø12.2mm JEOL or Ø15mm ISI/ABT/Topcon cylinder mounts on Hitachi M4. Made from aluminum with stainless steel screw, Allen wrench included.

Screws used are M3 x 6mm, socket head cap screw, stainless steel and M3 x 10mm, socket head cap screw, stainless steel.

15301

JEOL or ISI/ABT/Topcon mounts to pin stub

Small cylinder to pin mount adapter stubs. Enables the use of Ø9.5 and Ø12.2mm JEOL or Ø15mm ISI cylinder mounts on pin mount holder (FEI/Philips, ZEISS/LEO, Cambridge Instruments, Leica, Amray, Tescan and CamScan). Pin length 3/8" Material: machined aluminum with stainless steel Allen screws of 5 and 8mm, Allen wrench included.

15317

S-4 Mount Adapter, M4

The S-4 mount adapter allows the use of the S-4 specimen mounts (Cambridge Instruments, Leica, CamScan) on standard Hitachi M4 thread.

31mm diameter, 6mm height. Material: machined aluminum with stainless steel screw.

Note: Top Image shows S-4 mount left of the adapter, bottom: S-4 mount inserted into adapter.

15309-A

Pin Mount to Hitachi T-base Stage Adapter

This pin mount adapter enables the use of standard 1/8" (3.2mm) pin mounts directly on a T-base stage adapter used in Hitachi S-4000, S-4200, S-4300, S-4500, S-4700 and S-3600N SEMs. Made from aluminum with stainless steel set screw. Allen wrench included.

15399-10

JEOL Stage Adapter for Pin Mounts

Fits JEOL SEM: 6510/6390/6380/6360/6010/5700
/5600/5500/5410/5400/5300/T330
/T220/T300/T200/TT100/T20

Aluminum dovetail stage adapter for using standard 3.2mm (1/8") pin mounts with the JEOL SEM's listed above.

15396-10

JEOL 6400/5800 Stage Adapter for Pin Mounts

Fits JEOL SEM: 5800/5900/5910/6460/6480/6490/6610

Aluminum dovetail stage adapter for using standard 3.2mm (1/8") pin mounts with the JEOL SEM's listed above.

15371-6710

JEOL 7000/6500 Stage Adapter for Pin Mounts

Fits JEOL SEM: 7800F/7601F/7600F/7500F/7100F/7000F/6700F
/6500F/IT200/IT300/IT500/IT500HR/IT510/IT700HR/IT800

Solid brass dovetail stage adapter for using standard 3.2mm (1/8") pin mounts with the JEOL SEM's listed above. Can hold up to 5 standard 12.7mm (1/2") pin stubs or one larger pin stub.