Metallographic Mount Holders

15304

 Metallographic Mount Holder, 1" and 25mm

Specimen holder for 1" and 25mm metallographic mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Depth 8mm (5/16"). Allen wrench included. Shown holding a specimen, right.

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15307

Metallographic Mount Holder, 1-1/4" and 30-32mm

Accepts the standard 1-1/4" and 30-32mm metallographic specimen mount. 3.2mm (1/8") pin . Depth = 8mm (5/16"). Material: machined aluminum with stainless steel allen set screw. Allen wrench included.

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15306

Metallographic Mount Holder, 1-1/2" and 38-40mm

Specimen holder for 1-1/2" and 38-40mm metallographic mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Depth is 8mm (5/16"). Allen wrench included. Shown holding a specimen, bottom.

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15298

Metallographic Mount Holder, 2" and 50mm

Specimen holder for 2" and 50mm metallographic mounts. Standard pin stub 3.2mm (1/8"). Material: machined aluminum with stainless steel allen screws. Depth is 8mm (5/16"). Allen wrench included.

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15304M

Multi Metallographic Mount Holder, 1" and 25mm

Specimen holder for 4 x 1" and 25mm metallographic mounts. Holder height is 0.41" (10.4mm), not including pin length, with recessed areas 0.31" (7.9mm) deep. Open sides for easier sample removal. Standard pin stub 3.1mm (1/8") diameter x 9.5mm (3/8") length. Material: machined aluminum with stainless steel allen screws. Allen wrench included. Shown holding one metallographic mount (not included).

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15307M

Multi Metallographic Mount Holder, 1-1/4" and 30-32mm

Specimen holder for 3 x 1-1/4" and 30-32mm metallographic mounts. Holder height is 0.41" (10.4mm), not including pin length, with recessed areas 0.31" (7.9mm) deep. Open sides for easier sample removal. Standard pin stub 3.1mm (1/8") diameter x 9.5mm (3/8") length. Material: machined aluminum with stainless steel allen screws. Allen wrench included. Shown holding two metallographic mounts (not included).

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15306M

Multi-Metallographic Mount Holder, 1-1/2" and 38-40mm

Specimen holder for 3 x 1-1/2" and 38-40mm metallographic mounts. Holder height is 0.41" (10.4mm), not including pin length, with recessed areas 0.31" (7.9mm) deep. Open sides for easier sample removal. Standard pin stub 3.1mm (1/8") diameter x 9.5mm (3/8") length. Material: machined aluminum with stainless steel allen screws. Allen wrench included. Shown holding three metallographic mounts (not included).

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS

15603-9

Low Profile Metallographic Mount Holder, 1" and 25mm

Specimen holder for 1" and 25mm metallographic mounts and other cylindrical 1" diameter samples. Holder height is 0.33" (8.4mm, not including pin) with a recessed area 0.15" (3.8mm) deep. Pin is short 6mm length with standard 3.2mm (1/8") diameter. Open sides for easier sample removal. Made of machined aluminum with two stainless steel Allen screws (M3 x 6mm and M3 x 12mm) and Allen wrench included. Also shown on right holding a UHV-EL Reference Standard for EDS/WDS (not included).

15604-9

Low Profile Metallographic Mount Holder, 1-1/4" and 30-32mm

Specimen holder for 1-1/4" and 30-32mm metallographic mounts and other cylindrical 1-1/4" diameter samples. Holder height is 0.33" (8.4mm, not including pin) with a recessed area 0.15" (3.8mm) deep. Pin is short 6mm length with standard 3.2mm (1/8") diameter. Open sides for easier sample removal. Made of machined aluminum with two stainless steel Allen screws (M3 x 6mm and M3 x 12mm) and Allen wrench included.

15605-9

Low Profile Metallographic Mount Holder, 1-1/2" and 38-40mm

Specimen holder for 1-1/2" and 38-40mm metallographic mounts and other cylindrical 1-1/2" diameter samples. Holder height is 0.33" (8.4mm, not including pin) with a recessed area 0.15" (3.8mm) deep. Pin is short 6mm length with standard 3.2mm (1/8") diameter. Open sides for easier sample removal. Made of machined aluminum with two stainless steel Allen screws (M3 x 6mm and M3 x 12mm) and Allen wrench included. Also shown on right holding a specimen (not included).

15481

15481-1

Top Referencing Metallographic Mount Holder, 1" to 1.5" (25 to 32mm) diameter

Spring-loaded specimen holder for single metallographic mounts 1" to 1.5" in diameter. Two different heights allow for samples up to 0.5" (12.7mm) or 0.5-1.125" (12.7-28.6mm). Shown with, and without, an example of a mounted sample. The sample is pressed to the cap by the spring, ensuring the polished face of the specimen is flat across the mount. The removeable insert is used for 1" samples and is removed for larger samples. Ideal for wide area imaging, and stitching images with minimal focus change between stage moves. Supplied with a short M4 x 6mm removable pin stub. Fixture dimensions are 2.2" (56mm) in diameter overall, and 0.975" (24.8mm) tall with standard caps and 1.475" (37.5mm) tall with the 15481-4 caps.

15482, 15482-1

Dual Top Referencing Metallographic Mount Holder, 1" to 1.5" (25 to 32mm) diameter

Dual spring-loaded specimen holder for two metallographic mounts 1" to 1.5" in diameter. Two different heights allow for samples up to 0.5" (12.7mm) or 0.5-1.125" (12.7-28.6mm). The sample is pressed to the cap by the spring, ensuring the polished face of the specimen is flat across the mount. The removeable insert is used for 1" samples and is removed for larger samples. Ideal for wide area imaging, and stitching images with minimal focus change between stage moves. Two locations for 12.7 mm pin stubs are included for mounting of analysis standards with the samples. Four locations for 12.7 mm stubs are included for mounting of analysis standards with the samples. In order for standards to be at the mounted sample height when using the 0.5-1.125" cap, a pin stub extender (15318) is needed (not included). Supplied with a short M4 x 6mm removable pin stub. Fixture dimensions are 4.88 x 2.2" (124 x 56mm) overall, and 0.975" (24.8mm) tall with standard caps and 1.475" (37.5mm) tall with the 15481-4 caps.

15483, 15483-1

Quad Top Referencing Metallographic Mount Holder, 1" to 1.5" (25 to 38mm) diameter

Spring-loaded specimen holder for four metallographic mounts 1" to 1.5" in diameter. Two different heights allow for samples up to 0.5" (12.7mm) or 0.5-1.125" (12.7-28.6mm). The sample is pressed to the cap by the spring, ensuring the polished face of the specimen is flat across the mount. The removeable insert is used for 1" samples and is removed for larger samples. Four locations for 12.7 mm stubs are included for mounting of analysis standards with the samples. In order for standards to be at the mounted sample height when using the 0.5-1.125" cap, a pin stub extender (15318) is needed (not included). Ideal for wide area imaging, and stitching images with minimal focus change between stage moves. Supplied with a short M4 x 6mm removable pin stub. Fixture dimensions are 4.9 x 4.9" (125 x 125mm) overall, and 0.975" (24.8mm) tall with standard caps and 1.475" (37.5mm) tall with the 15481-4 caps.

15480

15480-1

Replacement Caps Metallographic Mount Holder, 1" to 1.5" (25 to 32mm) diameter

Replacement caps are available to freely swap between maximum sample height 0.5" and 0.5-1.125" variations using the same Top Referencing Metallographic Mount Holder base. Cap diameter is 2.2" (56mm) overall.

15327

EBSD Holder for 1"/25mm Mounts

70° pre-tilt EBSD holder for standard 1" /25mm embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. Material: vacuum grade aluminum with stainless steel set screws and allen key.

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS and M3 x 3mm, Set, SS

15328

EBSD Holder for 1-1/4"/32mm Mounts

70° pre-tilt EBSD holder for standard 1-1/4" /32mm embedding mounts. With this mount there is no need to tilt the SEM specimen stage which avoids drift and enables quick setup for EBSD analysis. Standard 3.2mm (1/8") pin. Material: vacuum grade aluminum with stainless steel set screws and allen key.

Screws used are M3 x 6mm Soc Cap, SS and M3 x 12mm Soc Cap, SS and M3 x 3mm, Set, SS