M-BOND™, PELCO SampleBond™, PELCO® Cyanoacrylate, Loctite® Adhesives
M-BOND™, PELCO SampleBond™, PELCO® Cyanoacrylate, Loctite® Adhesives
M-BOND™ 610 Adhesive
ion milling, cross-sectioning
This is a nonconductive, two-component, solvent-thinned, epoxy-phenolic adhesive for high performance applications. Chemically resistant and provides a thin layer of glue which has good ion milling properties. It has low viscosity and is extremely thin, with minimum creep, hysteresis and linearity problems. Solids content is 22%. It is an excellent adhesive for mounting samples for TEM dimpling and bonding of samples to TEM grids for imaging or FIB.
Operating temperature range, short term is -269° to +370°C; long term, -269° to +260°C.
Elongation can occur at +24°C (3%). This may be the widest temperature range general-purpose adhesive that is available.
A kit contains: 4 bottles (14g each) Resin, 4 bottles (11g each) Curing Agent, 4 brush caps for dispensing mixed adhesives, 4 disposable mixing funnels and instructions.
I - 16039 Adhesive SDS (173KB PDF)
I - 16039 Curing Agent SDS (167KB PDF)
There are Hazard Shipping Fees associated with this product.
PELCO SampleBond™ Adhesive
The PELCO SampleBond™ Adhesive has been especially developed for sample bonding to supports. It is a thin, fast curing cyanoacrylate type adhesive which can be used as a cleaner alternative to wax for mounting samples to glass for TEM/FIB thinning procedures. Ideal for bonding metals, silicon, ceramics and other non-porous materials to similar materials or to glass. Can also be used to bond thin samples together for cross section procedures. Samples glued with PELCO SampleBond™ can be easily debonded (removed) from the support by using #19920 PELCO® Pro Cyanoacrylate Debonder. Supplied in 20ml bottle with dispenser tip, closed with PTFE coated steel pin for optimum seal.
Cyanoacrylate Brand Cross Reference and Technical Data
There are Hazard Shipping Fees associated with this product.
PELCO SampleBond™ / PELCO® Pro Cyanoacrylate Debonder Kit
Conveniently packaged kit with PELCO SampleBond™ Adhesive for sample bonding on glass supports and PELCO® Pro Cyanoacrylate Debonder (see description below) to remove the sample after thinning. Kit contains two ea. 20ml bottles with dispenser tips.
The shelf life of cyanoacrylate glues (and epoxies) can be extended by storing them at lower temperatures; -20°C. At lower temperatures, the adhesive becomes very viscous and the speed of chemical reactions is practically reduced to zero. It will keep the adhesive stable for years. Before use, let the adhesive thaw with the container sealed to avoid condensation into the adhesive.
Cyanoacrylate Brand Cross Reference and Technical Data
PELCO SampleBond™: I - MSDS (93KB PDF)
PELCO® Pro Cyanoacrylate Debonder: F, Cg, I, T - MSDS (96KB PDF)
There are Hazard Shipping Fees associated with this product.
PELCO® Pro Cyanoacrylate Debonder
The PELCO® Pro Cyanoacrylate Debonder destabilizes and debonds cured cyanoacrylates. Useful for releasing specimens from holders, cleaning cyanoacrylates from surfaces and removing cured cyanoacylates from fingers. Works on all brands of cyanoacrylate glue (Loctite, Henkel, Permabond, 3M™, PELCO®, Aron Alpha, etc.). The debonder is also a solvent, please check before using on plastic surfaces / samples and avoid repeated skin contact. Supplied in 20ml bottle with dispenser tip.
The shelf life of cyanoacrylate glues (and epoxies) can be extended by storing them at lower temperatures; -20°C. At lower temperatures, the adhesive becomes very viscous and the speed of chemical reactions is practically reduced to zero. It will keep the adhesive stable for years. Before use, let the adhesive thaw with the container sealed to avoid condensation into the adhesive.
Cyanoacrylate Brand Cross Reference and Technical Data
F, Cg, I, T - SDS (96KB PDF)
There are Hazard Shipping Fees associated with this product.
PELCO® Cyanoacrylate Cure Accelerator
PELCO® Cyanoacrylate Cure Accelerator provides nearly instant curing for all cyanoacrylate glues. It makes sample mounting/demounting faster and easier, drastically cutting curing times. It allows for much greater gap filling and enhances bonding of difficult to bond materials.
Has a low odor solvent base and is compatible with PELCO®Samplebond™, and all PELCO® Pro Cyanoacrylate Adhesives.
The shelf life of cyanoacrylate glues (and epoxies) can be extended by storing them at lower temperatures; -20°C. At lower temperatures, the adhesive becomes very viscous and the speed of chemical reactions is practically reduced to zero. It will keep the adhesive stable for years. Before use, let the adhesive thaw with the container sealed to avoid condensation into the adhesive.
Cyanoacrylate Brand Cross Reference and Technical Data
F, Cg, I, T - SDS (139KB PDF)
There are Hazard Shipping Fees associated with this product.
International shipping restrictions may apply.
Loctite® 460 Sample Bonding Adhesive
Loctite® 460 is a fast curing thin glue which can be used as an alternative to wax for mounting samples to glass for TEM/FIB Thinning. Soluble in acetone. Sold in bottles of 0.70oz. / 20g.
There are Hazard Shipping Fees associated with this product.
| Hazard Warning Guides Used in Product Listings |
||
|---|---|---|
| Cg | = | Suspected Carcinogen |
| C | = | Corrosive |
| E | = | Environment |
| F | = | Flammable |
| H | = | Health |
| I | = | Irritant |
| L | = | Lachrymator |
| O | = | Oxidizing |
| R | = | Radioactive |
| S | = | Sensitizer |
| T | = | Toxic |
| U | = | Unlisted as hazard; unknown hazard if any |
| An extra shipping charge is required by the Carriers when hazardous goods are transported. | ||
Documentation
Documentation
Total items
Product subtotal