Eponate 12™ Kit, with BDMA
Eponate 12™ Kit, with BDMA
Aliphatic epoxy resin based on di- and tri-glydicyl ethers of glycerol with a significantly lower viscosity compared to Araldite 502. BDMA (<3%, see notes preceding) is used as the accelerator since it has lower viscosity and diffuses into tissues more rapidly. (See references below).
The viscosity of Eponate™ 12 at 25ºC is 15-21cP, WPE is 140–145 and Specific Gravity is 1.15–1.22g/ml. Other kit viscosities at 25ºC include DDSA (290cP) and NMA (225-315cP). Eponate™ 12 is hygroscopic.
Curing time is 16 to 24 hours at a temperature of 60°C or 2 to 3 hours using the PELCO BioWave® Pro+.
PELCO® Technical Notes, PELCO® Eponate 12™ Kit with DMP-30 and BDMA (276KB PDF)
First use of Epon 812 in U.S.A.:
Finck H, 1960. Epoxy resins in electron microscopy. J Biophys Biochem Cytol, 7, p. 27.
Luft JH, 1961. Improvements in epoxy resin embedding methods. J Biophys Biochem Cytol, 9, p. 409.
Eponate 12™ Embedding Kit, with BDMA includes:
| Cg, I | Eponate 12™ Resin, 450g (18005) SDS (92KB PDF) |
| I | DDSA, 450g (18022) SDS (134KB PDF) |
| C, I | NMA, 450g (18032) SDS (110KB PDF) |
| C, T, I, F | BDMA, 25g (18241) SDS (137KB PDF) |
Note: This product is hazardous. An extra shipping charge is required by the Carriers when hazardous goods are transported.
| Hazard Warning Guides Used in Product Listings |
||
|---|---|---|
| Cg | = | Suspected Carcinogen |
| C | = | Corrosive |
| E | = | Environment |
| F | = | Flammable |
| H | = | Health |
| I | = | Irritant |
| L | = | Lachrymator |
| O | = | Oxidizing |
| R | = | Radioactive |
| S | = | Sensitizer |
| T | = | Toxic |
| U | = | Unlisted as hazard; unknown hazard if any |
|
An extra shipping charge is required by the Carriers when hazardous goods are transported. |
||
Documentation
Documentation
🚚 Estimated Delivery: 5 - 6 weeks from payment confirmation
View full details