70° pre-tilt EBSD holder has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.
Thin specimen split mount with special wide opening up to 6.4mm (1/4"), height of head is 7.4mm (0.29"). Stainless steel.
15353
PELCO® EBSD Pre-Tilt Holder for Thin Specimens with SEMClipTM
70° pre-tilt EBSD holder has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.
PELCO SEMClipTMØ12.5mm (1/2"), Single Clip mount. An easy, quick and clean way to mount any type of thin specimen. Allen wrench included.
15354
PELCO® EBSD Pre-Tilt Holder for FIB Grids
FIB grid holder mounted on a standard 70° pre-tilt holder. Holds up to 2 FIB grids of the same thickness. Holder is fully adjustable, rotatable through 360°.
Has a removable pin to allow M4 mounting. Made of machined aluminum with stainless steel Allen set screw. Allen wrench included.
15355
PELCO® EBSD Pre-Tilt Holder with Small Set Screw Vise
70º pre-tilt holder with removable 3.2mm (1/8") pin to allow M4 mounting. Machined aluminum with stainless steel Allen set screw. Holder is fully adjustable, rotatable through 360°.
Single stainless steel set screw into an open slot that is 4mm (0.157") wide x 5mm (0.197") deep. Ø12.7mm (1/2") x 17.7mm (0.70") high. Allen wrench included.
15336
PELCO® EBSD Pre-Tilt Glass Slide Holder on Pin Stub
70° pre-tilt EBSD holder with variable size geologic/petrographic thin section holder. Holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Allen wrench included. Holder is fully adjustable, rotatable through 360°.
Screws used are M3 x 3mm set, stainless steel, clip screw is M2 x 3mm pan head, brass, 3.2mm (1/8”) pin.
15336-4
PELCO® EBSD Pre-Tilt Glass Slide Holder, M4
70° pre-tilt EBSD holder with variable size geologic/petrographic thin section holder. Holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Allen wrench included. Fully adjustable, rotatable through 360°.
Screws used are M3 x 3mm set, stainless steel, M4 x 8mm stainless steel socket head cap screw, clip screw is M2 x 3mm pan head, brass, M4 threaded hole.
16109
SEM Pin Stub Specimen Mounts for EBSD
Low profile 70º EBSD SEM Mounts Ø12.7mm for Cambridge, Leica, ZEISS, LEO, FEI, Philips, CamScan, Tescan, ETEC, and Amray SEM's. Aluminum, grooved edge, 9.5mm pin height
16333
Hitachi Angled Mounts
70° EBSD Aluminum Specimen Mounts, Ø15 x 12mm, M4
16370
JEOL and ISI/ABT/TopconMounts
70° EBSD Aluminum Specimen Mounts, Ø15 x 10mm
15428-70
70° EBSD Pre-Tilt Holder for Hitachi Mounts and Pin Stubs
Accepts 15mm Hitachi mounts on M4 thread. Pin can be rotated and fixed for optimum position. When the pin with M4 thread is removed, this holder also accepts a standard 12.7mm (1/2") pin stub with 3.2mm (1/8") pin. This holder is made of machined aluminum with stainless steel Allen set screw. Allen wrench included.
Screw used is M3 x 3mm set screw, stainless steel.
15329-70
70° EBSD Pre-Tilt Stub Holder, pin
70° EBSD Pre-Tilt Holder accepts standard 12.7mm (1/2") pin stubs with 3.2mm (1/8") pin. Grooved, made of machined aluminum with stainless steel Allen set screw. Allen wrench included.
Screw used is M3 x 3mm, Set, stainless steel set screw, stainless steel
15463-70
70° and 20° EBSD Pre-Tilt Stub Holder, Pin
70° and 20° EBSD Pre-Tilt Holder accepts standard pin stubs. Holder is machined from aluminum with pin 7.9mm (5/16") long and standard 3.2mm (1/8") diameter. Allen set screw is M3 x 3mm made of stainless steel. Allen wrench included.
15463-74
70° and 20° EBSD Pre-Tilt Stub Holder, M4
70° and 20° EBSD Pre-Tilt Holder accepts standard pin stubs. Holder is machined from aluminum with M4 threaded base. Allen set screw is M3 x 3mm made of stainless steel. Allen wrench included.
