For examination of thin samples from textiles, plants, paper, plastics, metals, etc., in cross section. Special wide opening up to 6.4mm (1/4"). Grooved head. Height of head is 7.4mm (0.29"). Pin is centered. Material: machined aluminum with stainless steel allen set screw. Allen wrench included.
Screw used is 2-56 x 3/8, Hex, Set, Stainless Steel
Opens to 3.75mm (3/8"). Height of head is 10.2mm (0.4") and split is centered. Pin is off-center. Material: machined aluminum with two stainless steel allen set screws. Allen wrench included.
Screw used is 2-56 x 1/4 Hex Soc, Set, SS
16350
Set Screw Vise
Single stainless steel set screw into an open slot that is 4mm (.157") wide x 5mm (.197") deep. 12.7mm (1/2") dia. x 17.7mm (0.70") high. Material: machined aluminum with stainless steel allen set screw. 3.2mm (1/8") dia. pin. Allen wrench included.
Screw used is M3 x 6mm, Set, Stainless Steel
15471
Large Set Screw Vise
Set screw vise with an open slot of 10mm (.394") wide x 5mm (0.197") deep. ø25mm (1") x 17.5mm (0.69") high. Material: machined aluminum with stainless steel set screw. 3.2mm (1/8") dia. Pin. Allen wrench included.
Screws used are M3 x 6mm, Flat, Set, SS and M3 x 8mm, Flat, Set, SS
15474
Wider Version Large Set Screw Vise
Set screw vise with an open slot of 13.2mm (0.520") wide x 3.9mm (0.155") deep. Ø25mm (1") x 17.5mm (0.69") high. Made of machined aluminum with stainless steel set screws. Two sizes of set-screws included, M3 x 6mm and M3 x 8mm. Holder has a 9.5mm long 3.2mm (1/8") diameter pin. Allen wrench included.
16340
Double Slotted Mini Vise
Double Slotted set screw vise with 2 ea. 1mm wide by 3mm deep slots, pin 3.2mm (1/8"). Clamp thin specimens and cross sections without the need for tape or conductive paint. Material: machined aluminum with 2 stainless steel allen set screws. Allen wrench included.
Screw used is M2 x 3mm, Set, Stainless Steel
15472
Large Double Slotted Vise
Large Double Slotted Set Screw Vise with 2 ea. 2.5mm by 5mm deep slots. Dimensions ø25x8 mm (1 x 0.32") with 3.2mm (1/8") pin. Clamp thin specimens and cross sections without the need for tape or conductive paint. Material: machined aluminum with 2 stainless steel allen set screws. Allen wrench included.d.
Screw used is M3 x 6mm, Flat, Set, SS
15290
Tube/Needle Clamp
Small tube, needle or wire clamp based on a standard Ø12.7mm (1/2") pin stub. Ideal for examining wire cross-sections or needle tips. Holds tube, wires and needles up to Ø2mm (0.08"); hole is 6.5mm (1/4") deep. Material: vacuum grade aluminum with a stainless steel set screw. Allen wrench included.
