Simport™ Embedding/Processing Cassettes & Accessories
Simport™ Embedding/Processing Cassettes & Accessories
Histosette II® Tissue Cassettes
27156-1 to 27156-5
Integral lid, large writing area, 45° angle. Suitable for certain types of cassette labeling instruments. Sold in dispenser boxes of 500.
Histosette II® Biopsy Cassettes
27157-1 to 27157-5
Integral lid, large writing area, 45° angle. Suitable for certain types of cassette labeling instruments. Sold in dispenser boxes of 500.
1mm square openings to maximize fluid exchange and to insure proper drainage.
Unisette™ Tissue Cassettes
made of acetal polymer
27400-1A,2A,3A,4A
Tissue Processing / Embedding Cassette with Cover
Cassettes keep specimen safely submerged in liquid. Efficient flow-through slots. Snap-latch and hinge-lock design prevent early separation of base and lid and allows for one hand operation. Large labeling area on two sides of cassette. Anterior writing area is at 35° angle. Sold in dispenser boxes of 500.
Pore size: 1mm square pores
Outside dimensions: 28.5 x 41 x 6.7mm (1.12 x 1.61 x 0.26")
Inside dimensions: 26 x 30 x 5mm (1.02 x 1.18 x 0.2")
Unisette™ Biopsy Cassettes
27450-1 to 27450-5
Specially made for biopsies.
Similar to Unisette™ Tissue Cassettes. Made of acetal polymer with 1mm openings assure maximum fluid exchange. Sold in dispenser boxes of 500.
Available in 7 non-cytotoxic, non-metallic colors.
Outside dimensions: 28.5 x 41 x 6.7mm (1.12" x 1.61" x 0.26")
Inside dimensions: 26 x 30 x 5mm (1.02" x 1.18" x 0.2")
How to use a Unisette™
| 1. Close lid by pivoting it forward. | 2. Press front of lid to lock it in place. | 3. After processing, remove lid by pulling it sideways. |
Slimsette™ Tissue and Biopsy Cassettes
made of acetal resin polymer
The Slimsette™ Cassettes, a new generation in the Simport Tissue and Biopsy Cassette family. These cassettes are more compact and efficient than previous cassettes. They feature a unique recessed cover allowing more cassettes to be stacked in automated cassette labeling machines and increasing the number of cassettes that may be stored in storage cabinets.
Slimsette™ Cassettes are molded from high density acetal resin polymer allowing them to sink rapidly. Acetyl resin polymer is compatible for use with histological reagents and solvents. The covers may be opened and closed repeatedly and always relock securely without specimen loss. The front labeling area has a 45° angle.
Slimsette™ Tissue Cassettes
27453-1(B) to 27453-5(B)
A tissue processing and embedding cassette designed to securely hold tissue specimens.
- 114 slot openings each measuring 1 x 5mm
- Chamber depth of 4mm
- 45° angle labeling/writing surface
- Recessed covers, pre-assembled on cassettes
Sold in dispenser boxes of 500 (1 case = 3 boxes) and in a case of 10 pre-filled sleeves of 75 cassettes for Thermo MicroWriter™ and PrintMate automated cassette labelers.
Slimsette™ Biopsy Cassettes
27454-1(B) to 27454-5(B)
A biopsy processing and embedding cassette designed to securely hold biopsy specimens.
- 0.8mm pore size
- 45° angle labeling/writing surface
- Recessed covers, pre-assembled on cassettes
Sold in dispenser boxes of 500 (1 case = 3 boxes) and in a case of 10 pre-filled sleeves of 75 cassettes for Thermo MicroWriter™ and PrintMate automated cassette labelers.
Slimsette™ Four Chamber Tissue Cassettes
27455-1 to 27455-5
A tissue processing and embedding cassette designed to securely hold tissue specimens.
- 114 slot openings each measuring 1 x 5mm
- 4 square compartments, each 13mm
- Chamber depth of 4mm
- 45° angle labeling/writing surface
- Recessed covers, pre-assembled on cassettes
Sold in dispenser boxes of 500 (1 case = 3 boxes). Will work in cassette labelers that print to a 45° print surface.
Micromesh™ Biopsy Cassettes, One Compartment
with covers assembled
27150-1(B) to 27150-5(B)
Cassettes have 1676 square openings of 0.38mm allowing for greatly improved fluid exchange without having to use biopsy pads. Large anterior and posterior slots in both cassette and cover ensure that the Micromesh™ cassette will sink rapidly. A large square compartment, 27mm, is perfect even for needle biopsies. The cover does not protrude above the cassette, a great space-saving feature allowing more cassettes to be stacked in automatic labeling machines and tissue processors. 45° angle writing area. Covers are pre-installed on cassettes. Sold in dispenser boxes of 250 or cases of 1000.
Micromesh™ Biopsy Cassettes, Four Compartments
27165-1(B) to 27165-5(B)
Similar to # 27150. Compartments measure 13mm, cover and base have about 1676 openings of 0.38mm maximizing fluid exchange. 45° labelling area. Sold in dispenser boxes of 250 or cases of 1000.
Microsette I® Biopsy Cassettes
made of polypropylene
Biopsy Processing/Embedding Cassettes (with covers assembled).
Cassette has 6 distinct compartments 7 x 12mm, numbered from 1-6. No biopsy pads necessary. Cover and base have over 3000 square openings of 0.26mm, 170 holes per compartment to maximize fluid exchange and proper draining.
Tissue Cassette Bases
made of acetal polymer (unless otherwise noted) for use with metal cover
27168-1(B) to 27168-5(B)
Disposable plastic tissue cassette bases are suitable for holding and identifying tissue samples in processing, embedding and sectioning procedures. The cassettes fit securely in microtome chuck adapters. They are molded from a high density polymer that is totally resistant to the chemical action of histological solvents. The slanted writing surface accepts writing easily, permitting sample identification throughout all stages of embedding and long afterwards when archived. They are available in several colors. These cassettes are made to accept standard metal lids, Product No. 27167. Sold in dispenser boxes of 500 or cases of 1500.
Metal Tissue Cassette Cover
27167
Stainless Steel lid for use in place of the plastic lid on Series 27168 Cassettes.
Size: 28mm width (1.10"), 33.5mm length (1.35").
Embedding Rings
made of high impact polystyrene
Use with #27147-6 Disposable
Deep Base Mold
Use with #27190 through 27196
Stainless Steel Base Mold
Embedding rings are suitable for holding and identifying tissue sample blocks and fit well in microtome chuck adapters. The etched writing surface on the ring is marked with an identification number and placed on top of the sample block. Additional paraffin is poured into the base mold to cement the ring onto the tissue block. The embedding ring securely holds the tissue sample in the microtome chuck adapter for sectioning and then identifies the sample while in storage. Embedding rings are available in white. Sold in boxes of 250 rings; one case is four boxes of 250 rings.
Macrosette® Processing/Embedding Cassettes with Covers
made of acetal polymer
27166, 27147-6
Use with #27147-6 Disposable Deep Base Mold
Disposable cassette especially designed to hold larger specimens with a maximum thickness of 10mm during embedding and storage. 40.1 x 28.5 x 13mm H (1.58" x 1.12" x 0.51" H). Sold in dispenser boxes of 250. Covers assembled.
See also:
Documentation
Documentation
🚚 Estimated Delivery: 5 - 6 weeks from payment confirmation
View full details
Total items
Product subtotal