The PELCO SEMClip™ SEM specimen mounts have been specifically designed to provide an easy, quick and clean way to mount any type of thin specimen on a specimen stub. The spring loaded clips can accommodate samples with a thickness up to 2mm. The samples are held down securely by a small spring-loaded clip and allow for easy change of samples. They do not require the use of adhesives thus avoiding waiting times and possible outgassing issues. The PELCO SEMClip™ mounts are available with single and multiple clips and are ideal to hold silicon chips, paper, wire, threads, thin films, sheet metal, etc. The PELCO SEMClip™ mounts with multiple clips can be used to either hold larger samples or multiple smaller samples. The PELCO SEMClip™ mounts are also ideal to hold the silicon chip specimen support mounts (#16006, #16007, and #16008).
PELCO SEMClip™ versions with 45° and 90° are available for cross section examination. For low working distance and high tilt applications, consider thePELCO Low Profile SEMClip™ Mounts.
Pin stub versions of PELCO SEMClip™ are available in diameters from 18 to 100mm and can be used with all SEMs using pin stubs: FEI/Philips, ZEISS/LEO, Cambridge, Leica, Amray, CamScan and Tescan.
The cylinder mount versions forJEOL SEMsare available in 25 and 32mm diameter. The SEMClip™ cylinder mount forHitachi SEMs(with M4 thread) are available in 15, 25, 32 and 50mm diameter.
Special versions are available for 90°, 45° and variable tilt specimen stubs.
16119-10, 16119-9-10
PELCO SEMClip™Ø18mm Pin Stub
16144-10, 16144-20, 16144-30
16144-9-10, 16144-9-20, 16144-9-30
PELCO SEMClip™ Ø25mm Pin Stub
16148-10, 16148-20, 16148-30
PELCO SEMClip™ Ø32mm Pin Stub
16112-10, 16112-20, 16112-30
PELCO SEMClip™ Ø38mm Pin Stub
16113-10, 16113-20, 16113-30, 16113-40, 16113-80
PELCO SEMClip™Ø50mm Pin Stub
16114-20, 16114-30, 16114-40
PELCO SEMClip™ Ø63mm Pin Stub
16116-20, 16116-40, 16116-60
PELCO SEMClip™ Ø100mm Pin Stub
16111-55
PELCO Low Profile SEMClip™, Ø12.7mm Pin Mount
16119-55
PELCO Low Profile SEMClip™, Ø18mm Pin Mount
16144-55
PELCO Low Profile SEMClip™, Ø25mm Pin Mount
15431
PELCO SEMClip™ Geological Thin Section Holder
Holds a standard geological thin section or petrographic slides of up to 47 x 27mm (compatible with 45 x 25mm, 46 x 26mm, 46 x 27mm, and 47 x 27mm). 2 clips are provided for secure holding. Tweezer inserts enable easy loading. Overall dimensions are 55 x 30 x 8mm. Pin length is 9.5mm. Material: aluminum with copper clips and brass screws.
This variable size geological thin section holder holds either standard petrographic slides of up to 48 x 28mm or slides from 40 x 20mm to 75 x 25mm. Two clips are provided for secure holding. Tweezers insert enables easy loading. Overall dimensions are 51 x 32 x 8mm. Standard ø3.2mm (1/8") pin length is 9.5mm. Material: vacuum grade aluminum with copper clips and brass screws.
Holds two standard geological thin sections or petrographic slides of up to 47 x 27mm (compatible with 45 x 25mm, 46 x 26mm, 46 x 27mm, and 47 x 27mm). Tweezer inserts enable easy loading. Clips are provided for secure holding. Overall dimensions are 55 x 58 x 8mm. Pin length is 9.5mm. Material: aluminum with copper clips and brass screws.
Holds four standard geological thin sections or petrographic slides of up to 47 x 27mm (compatible with 45 x 25mm, 46 x 26mm, 46 x 27mm, and 47 x 27mm). Tweezer inserts enable easy loading. Clips are provided for secure holding. Overall dimensions are 107 x 58 x 8mm. Pin length is 9.5mm. Material: aluminum with copper clips and brass screws.
Screw used is M2 x 3mm, Pan, Brass
16143
PELCO SEMClip™ Ø12.5mm Pin Stub, Single 90°
16141
PELCO SEMClip™ 12 x 12mm Pin Stub, 4 x 90°
16147
PELCO SEMClip™ 12 x 48mm Block with Pin, 10 x 90°
Note: Numbered 1-10, engraved on top, not shown in picture.
16155
PELCO SEMClip™ 12 x 48mm Block with Pin, 4 x 90° and 4 x 45°
Note: Numbered 1-8, engraved on top, not shown in picture.
16354-20
PELCO SEMClip™Ø25mm Pin Stub, 2 x 90°
16162
Low profile PELCO SEMClip™ Pin Stub, 90° and 45°
16355-20
PELCO SEMClip™ Ø25mm Pin Stub, 90° and 45°
15339-10
PELCO SEMClip™14 x 14mm with Pin, Variable Tilt 0-90°
16399, 16399-10
PELCO SEMClip™ Replacement Clips and Screws
PELCO SEMClip™ Clips are made from a spring grade beryllium-copper alloy. Thickness of clip is 0.25mm (0.01"), overall length is 12.7mm (1/2"), width at tip is 1.6mm (1/16"), hole diameter is 2.2mm (0.087").
16395
PELCO Low Profile SEMClip™ Clips
Replacement Low Profile PELCO SEMClip™ Clips. They are made from phosphor bronze and can be bent to accommodate samples. Each pack of 10 includes 5 short and 5 long Low Profile Clips.
